BNC is a radio frequency connector, a kind of coaxial cable, which is used for connecting knowledge networks & audio/video applications to radios, computers & TVs. In the event you are looking for audio/visual connector cables for the computer or any other electronic equipment, then BNC connectors could an option to think about.
In the event you are looking for audio/visual connector cables to connect your new transportable media player & stereo speakers to the computer, or replacing the elderly ones because of signal interference, then BNC connectors can be an excellent option.
BNC connector is an acronym for Bayonet Neil-Concelman connector. BNC is a Radio Frequency connector, a kind of coaxial cable, which is used for connecting knowledge networks & audio/video applications to radios, computers, TVs & other radio frequency electronic equipment. This connector derived its name from things - first, from the used expertise of the connection, & secondly, from the names of its own creators, Carl Concelman & Paul Neill, of Bell Labs.
BNC connector has a bayonet-like shell plug (the male portion) with tiny pins that slot in to the spiral slots on the receptacles (the female portion) of the connector. After the plug has been inserted in to the receptacles, it is twisted in to a locking position. This connector is usually used on 10BASE-2 narrow Ethernet networks, on both ends - the chain interactions & the network cards.
There is versions of BNC connectors, 50 Ohm & 75 Ohm. These are matched with the cables of the same properties for use. Frequencies below 2GHz use 50 Ohm while that below 4GHz use 75 Ohm. In the beginning, only 50 Ohm versions of BNC connectors were produced. At the time of its application, it was joined with various other cables & the difference occurring in the wires was unnoticeable at lower frequencies. Later on, the 75 Ohm section emerged, which can be recognized by the absent or the reduced dielectric at each mating finish. For DS3 Telco central office applications, 75 Ohm BNC connectors are used, while 50 Ohm is used for RF & knowledge.
A BNC connector is most often used for RG58 cables in order to terminate its coaxial cable. times the BNC connector is joined to the RG58 cable, compound video is produced like the from the commercial video equipment. Plenty of coaxial cables ought to not be used for interconnecting BNC connectors & RG58 cables, as it will lead to ground loops generating an undesirable stream of current in the conductor that attaches the points at the same potential.
Some people use BNC connector to connect the monitors in order to maximize the accuracy of the signals released by the video adapter. It makes for an ideal alternative to the RCA connector, when cable connector is used for common composite video devices. It is actually another type of RCA connector which is often used with RCA jacks by some large consumer electronic devices through a simple adapter. For higher frequencies, TNC (Threaded Neill-Concelman) connectors are adapted, as it offers standard performance.
For purchasing BNC connectors or any other kind of audio/visual cables, you can go on the world wide web. There is a lot of online stores that offer all kinds of cables including network cables, audio/visual cables, etc. at affordable prices.
0 komentar:
Posting Komentar